Plastic Market Predicted to Reach USD 831.54 Billion by 2030
PRESS RELEASE
Published August 9, 2023
The global Plastic Market size is predicted to reach USD 831.54 billion with a CAGR of 4.8% till 2030. Plastics, also known as polymers, are used to make a wide array of products ranging from paper clips to spaceships for their adaptability, ease of manufacturing, moldability, lightweight, waterproof properties, and low cost. Traditionally, plastics are derived from natural gas and petroleum and transformed them into different plastic products through processes like polymerization and molding.
However, manufacturers are now using renewable sources as a result of diminishing polymer sources. Bioplastics are plastics produced from renewable biomass sources such as corn starch, sawdust, vegetable fats and oils, and food waste. Rising concerns about plastic waste and environmental impact, the industry is also facing pressure to adopt more sustainable practices, such as developing biodegradable or recyclable plastics and promoting recycling initiatives. Additionally, the increasing awareness of the environmental impact caused by conventional plastics motivates manufacturers to prioritize the production of recyclable products.
Request For Sample PDF: https://www.nextmsc.com/plastic-market/request-sample
Key Trends:
- Sustainable Packaging Solutions: There is a growing trend towards sustainable packaging solutions, such as biodegradable plastics, compostable materials, and recycling initiatives, as consumers and businesses become more environmentally conscious.
- Shift towards Bio-based Plastics: The plastic market is witnessing an increasing demand for bio-based plastics made from renewable resources, as they offer an eco-friendlier alternative to traditional fossil-fuel-based plastics.
- Circular Economy Initiatives: Governments and businesses are adopting circular economy principles, emphasizing recycling, reusing, and reducing plastic waste to minimize environmental impact and conserve resources.
- Rising Demand for Single-Use Plastics Alternatives: With increasing concerns about plastic pollution, there is a rising demand for alternatives to single-use plastics, such as reusable bags, containers, and cutlery.
Growth Drivers:
- Packaging Industry Growth: The expanding packaging industry, driven by the e-commerce sector and consumer goods, is fueling the demand for plastic materials for packaging applications.
- Rapid Urbanization and Industrialization: The growing urban population and industrialization in emerging economies are boosting the demand for plastics in various sectors, including construction, automotive, and electronics.
- Technological Advancements: Advancements in plastic manufacturing technologies, such as injection molding and 3D printing, are opening new opportunities for innovative applications and product development.
- Increasing Use in Healthcare and Medical Devices: The plastic market is experiencing growth due to the rising use of plastics in healthcare and medical devices, thanks to their lightweight, cost-effectiveness, and sterilizability.
Restrains:
- Environmental Concerns: The plastic market faces increasing scrutiny and regulation due to its environmental impact, particularly plastic pollution, ocean litter, and the slow decomposition rate of certain plastics.
- Volatility in Raw Material Prices: Fluctuations in crude oil prices, a primary feedstock for plastic production, can impact the overall cost and profitability of plastic manufacturers.
- Shift towards Sustainable Alternatives: The growing preference for sustainable materials and the shift away from single-use plastics can pose challenges for traditional plastic manufacturers.
- Recycling Infrastructure and Collection Challenges: The lack of proper recycling infrastructure and challenges in collecting and sorting plastic waste can hinder efficient plastic recycling and circular economy initiatives.
Plastic Market is Segmented on the Basis of the Following:
By Type
- Polyethylene
- Polypropylene
- Terephthalate
- Polyvinyl Chloride
- Acrylonitrile Butadiene Styrene
- Polyamide
- Polycarbonate
- Polyurethane
- Polystyrene
- Epoxy Polymers
- Others
By Process
- Molding
- Injection Molding
- Rotational Molding
- Blow Molding
- Reaction Injection Molding (RIM)
- Compression Molding
- Extrusion
- Calendaring
- Thermoforming
- Others
By End User Industry
- Aerospace
- Construction
- Electrical & Electronics
- Automotive
- Energy
- Medical
- Agriculture
- Consumer Goods
- Others
By Region
- North America
- U.S.
- Canada
- Mexico
- Europe
- UK
- Germany
- France
- Spain
SDGs, Targets, and Indicators Analysis
1. Which SDGs are addressed or connected to the issues highlighted in the article?
- SDG 12: Responsible Consumption and Production
- SDG 13: Climate Action
- SDG 14: Life Below Water
- SDG 15: Life on Land
The article discusses the need for sustainable practices in the plastic industry, such as developing biodegradable or recyclable plastics and promoting recycling initiatives. These practices align with SDG 12, which aims to ensure sustainable consumption and production patterns. Additionally, the article mentions rising concerns about plastic waste and environmental impact, which are connected to SDG 13 on climate action. The impact of plastic pollution on oceans and land ecosystems is also relevant to SDG 14 on life below water and SDG 15 on life on land.
2. What specific targets under those SDGs can be identified based on the article’s content?
- Target 12.5: By 2030, substantially reduce waste generation through prevention, reduction, recycling, and reuse.
- Target 13.3: Improve education, awareness-raising, and human and institutional capacity on climate change mitigation, adaptation, impact reduction, and early warning.
- Target 14.1: By 2025, prevent and significantly reduce marine pollution of all kinds, particularly from land-based activities.
- Target 15.5: Take urgent and significant action to reduce the degradation of natural habitats, halt the loss of biodiversity, and protect and prevent the extinction of threatened species.
The article highlights the need to reduce plastic waste through recycling and reuse, which aligns with Target 12.5. It also emphasizes the importance of education and awareness-raising on the environmental impact of plastics, which relates to Target 13.3. The mention of plastic pollution and its impact on marine ecosystems connects to Target 14.1, while the focus on sustainable practices in the plastic industry is relevant to Target 15.5.
3. Are there any indicators mentioned or implied in the article that can be used to measure progress towards the identified targets?
- Indicator 12.5.1: National recycling rate, tons of material recycled
- Indicator 13.3.1: Number of countries that have integrated mitigation, adaptation, impact reduction, and early warning measures into national policies, strategies, and planning
- Indicator 14.1.1: Index of coastal eutrophication and floating plastic debris density
- Indicator 15.5.1: Red List Index
The article does not explicitly mention these indicators, but they can be used to measure progress towards the identified targets. Indicator 12.5.1 measures the national recycling rate, which reflects progress in waste reduction and recycling efforts. Indicator 13.3.1 assesses the integration of climate change measures into national policies and planning, indicating progress in raising awareness and building capacity. Indicator 14.1.1 measures the density of floating plastic debris in coastal areas, providing insights into the effectiveness of pollution prevention measures. Indicator 15.5.1 tracks changes in the Red List Index, which indicates progress in protecting threatened species and habitats.
SDGs, Targets, and Indicators Table
SDGs Targets Indicators SDG 12: Responsible Consumption and Production Target 12.5: By 2030, substantially reduce waste generation through prevention, reduction, recycling, and reuse. Indicator 12.5.1: National recycling rate, tons of material recycled SDG 13: Climate Action Target 13.3: Improve education, awareness-raising, and human and institutional capacity on climate change mitigation, adaptation, impact reduction, and early warning. Indicator 13.3.1: Number of countries that have integrated mitigation, adaptation, impact reduction, and early warning measures into national policies, strategies, and planning SDG 14: Life Below Water Target 14.1: By 2025, prevent and significantly reduce marine pollution of all kinds, particularly from land-based activities. Indicator 14.1.1: Index of coastal eutrophication and floating plastic debris density SDG 15: Life on Land Target 15.5: Take urgent and significant action to reduce the degradation of natural habitats, halt the loss of biodiversity, and protect and prevent the extinction of threatened species. Indicator 15.5.1: Red List Index Behold! This splendid article springs forth from the wellspring of knowledge, shaped by a wondrous proprietary AI technology that delved into a vast ocean of data, illuminating the path towards the Sustainable Development Goals. Remember that all rights are reserved by SDG Investors LLC, empowering us to champion progress together.
Source: digitaljournal.com
Join us, as fellow seekers of change, on a transformative journey at https://sdgtalks.ai/welcome, where you can become a member and actively contribute to shaping a brighter future.